How Much Does It Cost to Replace a Boiler?

How Much Does It Cost to Replace a Boiler?

  • Heating

If you’re experiencing issues with your boiler or it’s reaching the end of its lifespan, you may be wondering about the cost of replacing it. Boiler replacement is an important investment in your home’s comfort and energy efficiency. In this article, we’ll provide you with a comprehensive cost breakdown of boiler replacement. We’ll cover the signs that indicate your boiler needs replacement, what to expect during the replacement process, factors that influence the cost, and how Milltown can assist you with our professional boiler replacement services.

Signs Your Boiler Needs to be Replaced

Before diving into the cost breakdown, it’s crucial to recognize the signs that indicate your boiler is due for a replacement. Keep an eye out for the following red flags:

– Frequent breakdowns or repairs

– Inefficient heating and rising energy bills

– Uneven heating or inconsistent hot water supply

– A boiler that’s more than 15 years old

– Excessive noise or strange odors coming from the boiler

If you notice any of these signs, it’s a clear indication that it’s time to consider a boiler replacement.

What to Expect During Boiler Replacement

Understanding the boiler replacement process can help alleviate any concerns you may have. Typically, the process involves the following steps:

  1. Initial consultation and assessment by a professional HVAC technician.
  2. Selection of the appropriate boiler type and size based on your home’s heating needs.
  3. Removal of the old boiler and preparation of the installation site.
  4. Installation of the new boiler, including connecting the necessary plumbing and electrical components.
  5. Thorough testing and commissioning of the new boiler to ensure optimal performance.

It’s essential to hire a qualified and experienced HVAC professional for the installation to ensure a seamless and efficient process.

Factors That Influence the Cost of Boiler Replacement

Several factors can influence the overall cost of boiler replacement. These include:

  1. Boiler type and efficiency: High-efficiency boilers tend to be more expensive upfront but offer long-term energy savings.
  2. Boiler size and capacity: Larger homes or those with higher heating demands may require more powerful and costly boilers.
  3. The complexity of installation: The complexity of your home’s existing heating system and the ease of access to the installation site can impact the cost.
  4. Upgrades and additional components: If your existing system requires upgrades or additional components, such as new piping or a water storage tank, it will add to the overall cost.
  5. Geographic location: Prices can vary depending on the region and local market conditions.

Considering these factors will help you estimate the cost of your specific boiler replacement project.

How Mass Save Can Help With Your Boiler Replacement

Mass Save is an energy efficiency program available to residents of Massachusetts. It offers various incentives and rebates to promote energy-efficient upgrades, including boiler replacements. Through Mass Save, homeowners can benefit from:

– Rebates on qualifying high-efficiency boiler installations.

– 0% financing options for eligible energy-efficient upgrades.

– Free energy assessments to identify potential energy-saving opportunities.

– Expert guidance and support throughout the replacement process.

By taking advantage of Mass Save’s offerings, homeowners can significantly reduce the upfront cost of their boiler replacement project.

Cost Breakdown of Boiler Replacement

In conclusion, when considering a boiler replacement in Milltown, it’s essential to evaluate the signs that indicate the need for replacement and understand how much it costs to replace a boiler. At Milltown Heating and Cooling, we offer professional boiler replacement services that take into account several factors that influence the overall cost, including the boiler type, size, installation complexity, and geographic location. Fortunately, in partnership with Mass Save, we can provide valuable assistance by maximizing available rebates, offering financing options, and providing expert guidance throughout the replacement process. By leveraging these resources and choosing Milltown Heating and Cooling for your boiler replacement, you can make your project more affordable, energy-efficient, and tailored to your specific needs. Invest in the comfort and efficiency of your Milltown home by replacing your old boiler with our trusted services today.

Check out our Google Reviews!

By MillTown Plumbing

Furnace Replacement In Northborough MA

Furnace Replacement In Northborough MA

  • Air Conditioning
  • Furnaces
  • Heating
Northborough, MA Furnace Replacement MillTown Plumbing Finished Furnace Installation

Maintaining the heating and cooling appliances in your home is crucial to your comfort. However, over time, your appliances will get old and may start having issues. That’s exactly what this Northborough, MA client wanted to avoid. After one of our regular service visits to make sure everything was working properly, we let the client know that their furnace was over 15 years old. This Northborough, MA client decided furnace replacement was worth the investment for a more efficient 95% furnace and heat pump system.

After your furnace reaches a certain age, MillTown recommends furnace replacement due to a variety of reasons, ones that you can find below. Replacing an old furnace can be a challenging task, but it’s necessary to ensure your home’s HVAC system is reliable and safe. Learn more about this Northborough, MA furnace replacement process so you exactly what to expect.

Diagnosing a Furnace Replacement in Massachusetts

Furnace and Heat Pump Inspection

A heating system inspection is a comprehensive look into the various components of your HVAC system. These inspections check to make sure everything is working properly and safely. Here is a list of what is checked during a heating inspection:

  • Gas lines
  • Heat exchanger
  • Exhaust vents
  • Blower motor
  • Condensate pump
  • Condensate drain line
  • Wiring
  • Ductwork
  • Air filters
  • Evaporator coil

Symptoms Indicating You Need Furnace Replacement

When performing a regular maintenance visit for this VIP MillTown client, we found that their furnace was over 15 years old. The typical lifespan for a furnace is roughly 10-15 years depending on how well it was maintained. After 10-15 years of heating your home, you will start to see issues with your furnace, like:

  • Reduced efficiency
  • Increased energy bills
  • Uneven heating
  • Frequent breakdowns
  • Strange noises coming from the furnace
  • Poor indoor air quality

Benefits of Replacing Your Furnace

There are several benefits to a furnace replacement in Northborough, especially if you have an older or inefficient unit. Here are some key advantages:

  1. Energy Efficiency: Newer furnaces are designed to be more energy-efficient, often featuring higher Annual Fuel Utilization Efficiency (AFUE) ratings. This means they can convert a greater percentage of fuel into usable heat, resulting in reduced energy consumption and lower heating bills.
  2. Cost Savings: By upgrading to a more efficient furnace, you can save money on your heating expenses over time. The reduced energy consumption translates into lower utility bills, helping to offset the initial investment of purchasing and installing a new furnace.
  3. Improved Comfort: Older furnaces may struggle to evenly distribute heat throughout your home, resulting in uneven temperatures or cold spots. A new furnace can provide more consistent and balanced heating, enhancing overall comfort levels in your living space.
  4. Enhanced Reliability: Older furnaces are more prone to breakdowns and may require frequent repairs, leading to inconvenience and unexpected expenses. Replacing your furnace with a newer model reduces the likelihood of system failures, ensuring greater reliability and peace of mind.
  5. Advanced Features: Modern furnaces often come with advanced features such as programmable thermostats, zoning capabilities, and variable-speed blowers. These features allow for better temperature control, improved energy management, and customized heating settings based on your preferences.
  6. Environmental Benefits: High-efficiency furnaces consume less fuel and produce fewer greenhouse gas emissions compared to older models. By upgrading, you contribute to a more sustainable environment by reducing your carbon footprint.
  7. Increased Home Value: If you plan to sell your home in the future, having a new and efficient furnace can be an attractive selling point. Prospective buyers appreciate the presence of an updated heating system that offers energy savings and reduced maintenance requirements.

Northborough, MA 95% Furnace and Heat Pump Replacement Process

This Northborough, Massachusetts client would be replacing their 80% furnace air conditioning system with a 95% Bryant furnace and Bosch heat pump. The modernized unit with updated materials helps the system operate 15% more efficiently than the previous system (80% vs. 95%). This type of system is highly beneficial because the furnace is supported by the heat pump, a more efficient way to heat your home. The heat pump will control the heat and air conditioning when outdoor temperatures are higher than 30 degrees Fahrenheit, and the furnace will kick on when outdoor temperatures drop below 30 degrees. A 95% furnace and heat pump system is a great choice for Northborough homeowners due to its energy efficiency and adaptability in a variety of temperatures.

The first step in replacing the furnace is determining the type of unit needed for the home. Depending on the manufacturer, a horizontal unit may be required, which can be specific for left- or right-lying units. In this case, this furnace replacement in Northborough, MA was a horizontal-left unit.

Removing the Old Furnace

Once we had the appropriate furnace, we began the removal process. We started by turning off the power, evacuating the air conditioning refrigerant lines, and turning off the gas supply.

Next, we began the demolition of the old unit. We cut off the natural gas supply to the furnace and cut the electrical wires that power the unit.

Northborough, MA Furnace Replacement MillTown Plumbing Old Furnace Removal and Demolition
Old Furnace Removal and Demolition

Then we removed the service cover, exposing the internals to the furnace and heat pump. We also unscrewed the exhaust flue from the unit.

Northborough, MA Furnace Replacement MillTown Plumbing Service Cover Removed on Old Furnace
Service Cover Removed on Old Furnace

Next, the filter and the return air duct on the right side of the HVAC unit were removed. On the left side, there was an AC unit that would be replaced with a heat pump.

Northborough, MA Furnace Replacement MillTown Plumbing Furnace Filter Removal
Furnace Filter Removal

During the removal process, we were incredibly careful to not disturb the flexible ductwork. Flexible ducts are easily squished due to their soft, flexible nature. We took care to avoid this problem and removed the AC coil from the housing to make removal of this furnace replacement in Northborough much easier.

Northborough, MA Furnace Replacement MillTown Plumbing Old AC Coil Removal
Old AC Coil Removal

The furnace assembly was then able to be removed. Lastly, the old platform for the system was removed. This platform was constructed of 2×4 framing lumber.

Northborough, MA Furnace Replacement MillTown Plumbing Furnace Platform Removal
Furnace Platform Removal

Preparing to Install the 95% Bryant Furnace and Bosch Heat Pump

While preparing to install the replacement furnace and heat pump, it was noted that the provided 16” concentric vent would be too short for the roof application with the new HVAC system. However, the quick parts-delivery service at MillTown Plumbing was able to get them the correct 32” concentric vent in time to avoid drilling an additional hole in this Northborough, Massachusetts client’s roof.

Northborough, MA Furnace Replacement MillTown Plumbing 32" Concentric Vent
32″ Concentric Vent

To pair the heat pump to the furnace, metal tabs on the heat pump were folded back to allow the units to sit flush with each other.

Northborough, MA Furnace Replacement MillTown Plumbing Assembling New Furnace and Heat Pump
Assembling New Furnace and Heat Pump

Bryant Furnace Installation

Once the old furnace was removed, we installed a new drain pan tray and stand to catch any excess condensation or leaks and to keep the new unit off the floor. Additionally, a new air filter housing was installed on the return air duct for the furnace replacement in this Northborough home.

Northborough, MA Furnace Replacement MillTown Plumbing Air Filter Housing Installation
Air Filter Housing Installation

Once the air filter housing was installed, the furnace replacement could be put into place. Following that, the installation was relatively straightforward in terms of reconnecting gas lines, electrical connections, and refrigerant lines. Additionally, all parts where air flowed through were sealed with foil tape.

Northborough, MA Furnace Replacement MillTown Plumbing Sealing Furnace with Foil Tape
Sealing Furnace with Foil Tape

However, there were modifications that needed to be made. The client had a propane fuel source for their appliances, however, this furnace was set up for gas supply. That meant the expert HVAC technicians at MillTown Plumbing needed to install a natural gas to LP (liquid propane) conversion kit.

Northborough, MA Furnace Replacement MillTown Plumbing Natural Gas to LP Conversion Kit
Natural Gas to LP Conversion Kit

This kit is designed to use a heavier pressure switch for the gas supply valve. This is because propane has a higher density than gas, so it requires a stiffer spring to deliver the correct amount of fuel.

On the gas supply valve, the HVAC technicians installed a pressure switch that cuts off the supply if the pressure gets too low. If the supply pressure is too low, the HVAC system can run inefficiently which creates soot and accelerates system failure. We wanted to guarantee the best possible performance and longevity for this furnace replacement in Northborough, MA.

Northborough, MA Furnace Replacement MillTown Plumbing Gas Supply Valve
Gas Supply Valve

Outdoor Heat Pump Compressor and Condenser

The outdoor heat pump unit was installed on a plastic stand to keep it off the ground, ensuring adequate airflow and environmental protection. The electrical connections were properly hooked up, and the refrigerant lines were connected. The system was then recharged with refrigerant.

Northborough, MA Furnace Replacement MillTown Plumbing Outdoor Heat Pump Compressor and Condenser
Outdoor Heat Pump Compressor and Condenser

Thermostat Installation and Testing

With every new HVAC system installation, MillTown provides and installs a new thermostat.

Northborough, MA Furnace Replacement MillTown Plumbing HVAC System Thermostat
HVAC System Thermostat

Once everything is installed, the system is tested for functionality.

Northborough, MA Furnace Replacement MillTown Plumbing Finished Furnace Installation
Finished Furnace Installation
Northborough, MA Furnace Replacement MillTown Plumbing Finished Furnace Ductwork Installation
Finished Furnace Ductwork Installation

Northborough, MA Furnace Replacement Contractor

Here at MillTown, we provide cost-effective, permanent solutions to keep your home in tip-top shape. We commit to your satisfaction and offer high-quality, same-day service. Our technicians are clean, courteous, and respectful of your home. It is why Massachusetts and New Hampshire homeowners have trusted us for over 35 years. Contact MillTown today if you are a local Northborough homeowner interested in furnace replacement, repair, or maintenance!

Timothy M. CoyTimothy M. Coy
14:57 20 Sep 22
My review is more for Pedro my tech, than Milltown. Pedro was amazing! He took the time to walk me through not only my issue, but also just general utility care I should know as a homeowner. He was personable, and really took the time. And it was greatly appreciated! I’d have him back for all my plumbing needs! I think nearly $600 was a little steep to replace a hose spigot… But I was willing to pay it because of the service Pedro provided.
Jan YoungJan Young
19:23 09 Aug 22
Less than eight hours after I first called Milltown with a dead water heater and no hot water, I now have a brand new unit working perfectly. The technician, Jonathan, and the supervisor with him were wonderful. I am so grateful that I didn’t have to wait several days, and that these folks were so nice to work with. And the dispatcher, Ralph, was very helpful as well. I am very happy right now!
Lisa SilvaLisa Silva
11:43 25 Jun 22
Our shower started leaking the week before I was having surgery. Milltown sent Darrin out to assess our situation . Darrin recommended we completely replace our shower unit . We agreed. He was able to get things expedited and was in our home working on it two days after my surgery. He was kind, knowledgeable, worked cleanly, and efficiently. His partner James was also very good. Thank you Milltown for sending such a good crew.
J S DoaneJ S Doane
14:18 24 Mar 22
I was already a Milltown customer for both plumbing and water heater services, so I didn’t hesitate to contact them for some needed electrical work at my 100+ year old house. Based on my experience with this company, I expected good service. The service I received from the Electrical Team was OUTSTANDING!. Matthew H was so helpful during the estimating process, and in his recommendations, and patiently answered all of my questions. On the scheduled work days, Matthew and his team always arrived on time, and were as professional and courteous as they could possibly be. This is a two-family home, and the amount of work that they have completed on time, as promised, has been amazing. So organized, and informative every step of the way, and I’m thrilled with the results. The peace-of-mind I now have in knowing that the work was done correctly by licensed professionals like Matthew and his team is so important, especially for electrical services. I highly recommend Matthew H and the whole Milltown electrical crew!March 23rd: For the last package of work, Matt and Dan came back to install all of the new ceiling light fixtures, all NINE of them. Each new fixture was replacing a really old one that was not LED compatible. The installation was fast, and perfect, and they even cleaned up each area as they went!. Service doesn’t get any better than this. Milltown is the best!!
Nicole FoxNicole Fox
22:25 17 Mar 22
Customer service was good. They set up an appointment for the day after my call, even though it was not an emergency request. Technicians Pedro and James were friendly, knowledgeable, and very helpful in explaining the repair and costs. I decided not to wait on getting another quote, since the price was within the range I expected. They had their tools right there. After struggling to fix the clog myself for months, the drain finally flows again! I definitely recommend this company for their professional team and quick response.

Furnace replacement near me:


  • Acton, MA
  • Andover, MA
  • Ayer, MA
  • Ballardville, MA
  • Bedford, MA
  • Billerica, MA
  • Boxford, MA
  • Burlington, MA
  • Carlisle, MA
  • Chelmsford, MA
  • Clinton, MA
  • Concord, MA
  • Danvers, MA
  • Devens, MA
  • Dracut, MA
  • Dunstable, MA
  • Georgetown, MA
  • Groton, MA
  • Harvard, MA
  • Haverhill, MA
  • Hudson, MA
  • Lancaster, MA
  • Lawrence, MA
  • Leominster, MA
  • Littleton, MA
  • Lowell, MA
  • Lunenburg, MA
  • Lynnfield, MA
  • Marlborough, MA
  • Methuen, MA
  • Middleton, MA
  • Newburyport, MA
  • North Reading, MA
  • Pepperell, MA
  • Reading, MA
  • Tewksbury, MA
  • Topsfield, MA
  • Topsfield, MA
  • Townsend, MA
  • Tyngsborough, MA
  • Waltham, MA
  • Westford, MA
  • Wilmington, MA
  • Woburn, MA

New Hampshire

  • Amherst, NH
  • Atkinson, NH
  • Auburn, NH
  • Bedford, NH
  • Brookline, NH
  • Chester, NH
  • Danville, NH
  • Hampstead, NH
  • Hollis, NH
  • Litchfield, NH
  • Londonderry, NH
  • Manchester, NH
  • Mason, NH
  • Merrimack, NH
  • Milford, NH
  • Nashua, NH
  • Pelham, NH
  • Plaistow, NH
  • Salem, NH
  • Sandown, NH
  • Windham, NH
By Milltown Plumbing

A Guide to Heat Pump Installation Cost Factors

A Guide to Heat Pump Installation Cost Factors

  • Heating

If you’re looking for ways to reduce your home’s heating and cooling costs, consider a heat pump. This versatile system can both heat and cool your home, providing year-round comfort while potentially lowering your energy bills. At Milltown Plumbing, we specialize in heat pump installation for year-round comfort and savings. In this blog post, we’ll dive into the details of heat pumps, including how they work and the costs associated with their installation.

What is a Heat Pump?

A heat pump is an energy-efficient heating and cooling system that works by transferring heat from one place to another. Unlike traditional heating systems, which generate heat, a heat pump moves heat from the air, ground, or water into your home during the winter and out of your home during the summer.

How Does it Work?

A heat pump works by using a refrigerant that absorbs heat from the outside air, ground, or water and carries it into your home. The system then distributes the warm air through ducts or a ductless mini-split system. In the summer, the process is reversed, and the heat pump removes heat from your home and releases it outside, leaving your home cool and comfortable.

Factors That Influence Cost

Several factors can influence the cost of heat pump installation, including:

  1. Size and capacity of the heat pump
  2. Type of heat pump (air-source, ground-source, or hybrid)
  3. Type of system (ducted or ductless mini-split)
  4. Complexity of the installation (i.e., whether ductwork needs to be installed)
  5. Location of the installation

How Can Mass Save Influence Cost?

Mass Save helps Massachusetts homeowners and businesses save money on energy bills and reduce their carbon footprint. This program provides a variety of energy-efficient home improvement services, including weatherization, insulation, heating, cooling, and ventilation upgrades. One of the most significant benefits of Mass Save is the rebates and incentives offered for heat pump installation.

When you work with a Mass Save-authorized contractor, you can receive rebates of up to $4,500. These rebates help to offset the cost of installation, making it more affordable for homeowners. The amount of the rebate depends on the type and size of the heat pump installed, as well as the efficiency rating of the system. By choosing an energy-efficient heat pump, you can maximize your rebate and save even more money.

In addition to rebates, Mass Save also offers interest-free financing for heat pump installations through the HEAT Loan program. Homeowners can finance heat pump installation for up to 7 years at 0% interest, making it an affordable investment.

Choose Milltown Plumbing for Affordable and Efficient Heat Pump Installation

In conclusion, the cost of installing a heat pump depends on several factors, including the size of your home, the type of heat pump, and the complexity of the installation. At Milltown Plumbing, we offer professional heat pump installation services that take these factors into account to provide you with a customized and affordable solution. Additionally, by taking advantage of programs like Mass Save, you can save even more on your installation and enjoy reduced energy bills over time. Contact us today to learn more about how we can help you install a cost-effective and energy-efficient heat pump in your home.

Check out our Google Reviews!

By MillTown Plumbing